|
This is the best exhaust wrap product currently available in the automotive market with the highest thermal ratings available. Unlike other wraps, titanium exhaust wrap does not need a finish coating of high temperature silicone to protect the wrap. Besides superior thermal protection, titanium exhaust wrap is also much easier to install.
DEI’s Titanium Wrap is constructed from pulverized lava rock, extruded into fibers and then woven into a tight weave which gives this material titanium-like strength and toughness. This improvement in thermal protection helps reduce underhood temperatures resulting in cooler air intake for improved performance and horsepower. Less heat in the engine compartment means reducing the chances of heat soak conditions on vital underhood components.
Titanium Wrap is extremely durable and capable of handling more heat than any other wrap found on the market today. Typical glass fiber wrap is rated at handling 1200 degrees fahrenheit of maximum direct heat, while Design Engineering’s new Titanium Wrap, using LR Technology, is capable of handling direct continuous heat up to 1800 degrees fahrenheit and radiant heat up to 2800 degrees fahrenheit. And because it’s pliable, there’s no need to wet the wrap when wrapping headers or pipes as many do in order to make the wrapping process easier to manage and to get a tight wrap.
Please note that titanium exhaust wrap does not require a silicone spray coating over the finished wrap. Because of the material, silicone spray coatings will not properly adhere to titanium exhaust wraps.
Part Number: DEI 010127
Details: 2" by 50’ Titanium Roll
| Exhaust Wrap Application Chart |
| Required Inches Per Linear Foot of Exhaust Pipe |
| Exhaust Pipe Diameter |
One Inch Wrap Needed |
Two Inch Wrap Needed |
| 1.375 |
70 Inches Per Foot |
30 Inches Per Foot |
| 1.500 |
76 Inches Per Foot |
33 Inches Per Foot |
| 1.625 |
82 Inches Per Foot |
35 Inches Per Foot |
| 1.750 |
88 Inches Per Foot |
38 Inches Per Foot |
| 1.875 |
95 Inches Per Foot |
41 Inches Per Foot |
| 2.000 |
101 Inches Per Foot |
44 Inches Per Foot |
| 2.125 |
108 Inches Per Foot |
46 Inches Per Foot |
| 2.250 |
113 Inches Per Foot |
49 Inches Per Foot |
| 2.500 |
125 Inches Per Foot |
52 Inches Per Foot |
| 3.000 |
136 Inches Per Foot |
60 Inches Per Foot |
| Please allow 8" of additional wrap for each significant bend |
| Each DEI 010127 Titanium Exhaust Wrap Roll Contains 600" of 2" Wrap |
| 
